pc banner ofpc banner of
Industry News

Working principle of SCR urea pump

2022-08-26
View:5

SCR urea pumpis an important part of the urea solution injection metering system. Its main function is to extract the urea solution in the urea tank and maintain a certain pressure, then transfer it to the injection unit, to meet the flow and pressure requirements of the injection metering system.

SCR urea pumpis mainly composed of an SCR urea pumpbox, liquid level temperature sensor, urea filter, urea solution pump, and air urea pipeline.

The hydraulic and mechanical principles of the SCR urea pumpare mainly composed of a motor, supply pump, reverse pump, on-off valve, pressure vessel chamber, throttle hole, etc. . The pump has two working states, supply, and emptying. When the liquid is fed to the urea injection system, the motor drives the supply pump, which conveys the urea solution from the urea box to the pressure vessel.

SCR urea pump


How it works:

SCR urea pumpat work, urea is first filtered through the filter element to remove impurities to prevent clogging of pipes and nozzles. It then enters the urea solution pump and is fully mixed with the Compressed air and sprayed out together. SCR urea pumpafter the injection is stopped, the Compressed air is blown backward for some time to return the residual urea to the tank to prevent the urea crystallization from blocking the line.

The urea sensor converts the liquid level signal into a resistance signal, which can be displayed directly on the instrument panel after passing through the control unit. When the urea level is less than 10%, the urea lamp will light up to prompt the user to add urea in time.

In the low-temperature environment, to prevent pipeline jams, the pump needs to empty the pressure vessel. The controller automatically judges that the pump is in an empty state. At this time, the supply pump stops working and the valve opens and shuts, the reverse pump pumps the residual urea solution in the pressure vessel cavity back into the urea tank.

The above is the working principle of the SCR urea pump. If you have any other questions, please feel free to contact us.

Please Contact Us!

ADDRESS

Building A3, Qiuyue Science and Technology Park, Ganzhou Economic and Technological Development Zone, Jiangxi Province

Tel.

0086-21-34720020

Follow Us

CopyRight © 2026 - Shanghai JONSN Fluid Equipment Co., Ltd.  All rights reserved  Sitemap All tags  Designed by Zhonghuan Internet
WHAT ARE YOU LOOKING FOR?
*
This field is required
Total quantity you need
*
This field is required
*
This field is required
Email format error
Due to email instability, you might miss our correspondence. Please provide your phone number for alternative contact.
This field is required
Telephone information is wrong!
Send Message
Get Custom Fluid Dosing Selection Solution
Starting a new project? Contact us for tailored pump solutions — from inlet specs and pipe sizing to motor matching and drawings — designed to fit your working conditions and accelerate your R&D cycle.
Company Name
*
This field is required
Email
*
This field is required
Email format error
Phone
This field is required
Telephone information is wrong!
WhatsApp
Message
*
This field is required
Send Message