Semiconductors & ElectronicsSemiconductors & Electronics
Semiconductors & Electronics

Advanced Packaging

2026-11-20
View:5
Applications · Advanced Packaging Electroplating

JONSN Precision Micro Gear Pumps for Advanced Semiconductor Packaging Electroplating: Zero-Pulsation Metering of Acidic Copper Electrolytes

Advanced packaging is the key path for post-Moore chip performance, covering bump plating, through-silicon vias, redistribution layers and damascene electroplating. These processes place near-extreme demands on electrolyte metering accuracy, chemical stability and pulsation control — any minor flow deviation or medium fluctuation directly compromises wafer-level package yield and reliability.

Pulsation rate ≤ 1%
Flow accuracy ≤ ±0.2%
Zero-leakage magnetic drive
Zero metal-ion leaching
矩形 6.jpg

Core Industry Requirements for Packaging Electroplating

1
Ultra-High Metering Accuracy
Electrolyte ratio error must be held within ±0.5% to guarantee plating thickness uniformity (within-wafer uniformity WiW ≤ 3%).
2
Ultra-Low Pulsation
Excessive pulsation causes micro-roughness of the deposit and bubble defects; the requirement is pulsation rate ≤ 1%.
3
Strong Corrosion Resistance
Electrolytes are typically strong acid / strong base systems (pH 0~14) containing high-concentration metal ions, so wetted materials need long-term chemical compatibility.
4
Zero Metal-Ion Contamination
Parts in contact with the medium must not release metal ions, avoiding contamination of the plating bath and the wafer.
5
Zero Leakage
Semiconductor cleanrooms have zero tolerance for chemical leakage; magnetic drive is required for fully enclosed transfer with no dynamic seals.
6
7×24 Long-Term Continuous Operation
Uninterrupted line operation requires stable rated-duty running of ≥ 8,760 hours per year.

Target Product Recommendation

The JONSN-MPG (Micro Precision Gear Pump) series is a JONSN-developed miniature precision metering gear pump for semiconductor wet processes, purpose-designed for low-volume, high-precision and highly corrosive fluid transfer. It has passed full-duty-cycle qualification at leading customers including AMEC (中微半导体) and NAURA (北方华创), and is in production-matched service.

MPG Micro Precision Gear Pump
100 ml/min(customizable 50~500 ml/min)
Hermetically sealed magnetic-isolation design, optimized for stable high-speed delivery of acid copper sulfate baths, process additives and specialty plating chemistries.
Applicable Media Compatible Electrolytes
pH 0~14acidic / alkaline
Electroplating copper sulfate solution (CuSO4), process additives (accelerator, leveler, suppressor), as well as various acidic / alkaline plating baths and chemical solutions.

Core Technical Parameters & Material Configuration

PARAMETERS
JONSN-MPG · Core Technical Parameters
ParameterSpecification
Series ModelJONSN-MPG
Rated Flow Rate100 ml/min (customizable 50~500 ml/min)
Maximum Output Pressure10 bar
Flow Control Accuracy≤ ±0.2% (far beyond the ±1% general industry standard)
Pulsation Rate≤ 1%
Leakage LevelZero leakage
Drive MethodServo motor precision drive / optional closed-loop flow feedback
Sealing TypeMagnetic coupling, no dynamic seal
MATERIAL SCHEME
Wetted Component Material Configuration
ComponentMaterialTechnical Advantage
Pump HeadHastelloy C-276Excellent resistance to acid, alkali and chloride corrosion, suitable for long-term immersion in plating baths
Gear ShaftCeramic + PEEK compositeHigh hardness, low friction, resistant to abrasive wear
BushingPEEK composite ceramicCombines high mechanical strength with chemical inertness, zero metal-ion leaching
GearsSpecial alloy / ceramic optionalPrecision ground, mesh backlash controlled ≤ 5 μm

Simplified Electrolyte Circulation Workflow

矩形 6备份.jpg
Electrolyte Supply Tank
↓
Filtration Unit (0.1 μm precision filtration)
↓
【 JONSN-MPG Precision Metering Gear Pump 】
↓
Degassing / De-foaming Module
↓
Plating Chamber (wafer-level plating bath / nozzle)
↓
Overflow Recovery → Recirculation Supply Tank
Key control logic: the servo motor drives the MPG gear pump at a set speed to deliver the electrolyte precisely; with optional real-time flowmeter feedback, the loop is closed automatically — the controller compares instantaneous flow with the setpoint and compensates the speed, keeping the flow deviation within ≤ ±0.5% throughout the process.

JONSN Core Competitive Advantages

Advantage DimensionSpecific Performance
Performance Beyond Imported BrandsIn full-duty-cycle long-duration evaluation at AMEC, running accuracy, stability and durability fully surpass leading German imported brands, achieving domestic substitution.
Validation by Leading CustomersQualified into the approved supplier systems of three major semiconductor leaders: AMEC, NAURA and Hwatsing Technology.
Ultra-Low Pulsation TechnologyPrecision-ground gears combined with multi-tooth meshing principle deliver pulsation rate ≤ 1%, guaranteeing microscopic deposit uniformity.
Full Material CustomizationHastelloy, ceramic and PEEK multi-material combinations precisely matched to the chemical properties of the medium and the process window.
Closed-Loop Quality ControlRaw material screening → precision gear grinding → high-precision assembly → 100% factory final inspection and calibration, eliminating batch quality deviation.
Dedicated Fluid Test CenterComplete capability in full-duty-cycle simulation, ageing validation and accuracy calibration, backed by multiple in-house patents.
Fully Self-Controlled Supply ChainIndependent design, manufacturing and quality control, free from imported supply-chain constraints, with markedly better lead time and after-sales response than imported brands.
Authoritative CertificationISO 9001 / CE / Japan Classification Society (ClassNK) certification.

Please Contact Us!

ADDRESS

Building A3, Qiuyue Science and Technology Park, Ganzhou Economic and Technological Development Zone, Jiangxi Province

Tel.

0086-21-34720020

Follow Us

CopyRight © 2026 - Shanghai JONSN Fluid Equipment Co., Ltd.  All rights reserved  Sitemap All tags  Designed by Zhonghuan Internet
WHAT ARE YOU LOOKING FOR?
*
This field is required
Total quantity you need
*
This field is required
*
This field is required
Email format error
Due to email instability, you might miss our correspondence. Please provide your phone number for alternative contact.
This field is required
Telephone information is wrong!
Send Message
Get Custom Fluid Dosing Selection Solution
Starting a new project? Contact us for tailored pump solutions — from inlet specs and pipe sizing to motor matching and drawings — designed to fit your working conditions and accelerate your R&D cycle.
Company Name
*
This field is required
Email
*
This field is required
Email format error
Phone
This field is required
Telephone information is wrong!
WhatsApp
Message
*
This field is required
Send Message